Argyll and Bute UK|
|Website:||Open website in new window|
A Real Multipurpose Workboat
STATIC BP14T, Anchor handling winch forward, Large seahorse towing gear centre line aft, Hydraulic crane 9.25m reach, 2 x 10T Tugger winches, Anchor handling roller, 2 x Plough winches, 2 x Generators and Bow Thruster.
A very versatile Workboat and Tug.
|No. of engines:||2|
|Engine model:||Caterpillar 3412|
|Length over all:||28.25m|
Principal dimension: 28.25m x 9.50m x 2.490m
Overall breadth including fender: 9.50m
Draught: 2.10m (light shipcond) 2.38m (normal
service cond) 2.50m (loaded)
Air draft: Approx 15.0m with mast
Free deck space 40m²
Towing Gear: Large seahorse centreline aft
Anchor handling roller: Width 0.5m diameter 800mm SWL bow roller 20T
Tugger winches: 2 x 10T SWL positioned on deck fwd of wheelhouse.
Wire capacity 50m x 32mm diameter.
Plough winches: 2 x 2.5T winches aft of wheelhouse. Wire capacity
100m x 32mm.
Hydraulic crane: 1 x Effer Knuckleboom crane. Max reach from crane
x 2 Caterpillar 3412
Total output main engines: 806kW – 1080 hp
Static bollard pull: 14T
Generators: Main generator Caterpillar 3406 b Harbour set-lister dbr, four cylinder bow thrusters engine 3306 b (210hp)
Class notation waters Lloyds Register + 100A1 + Tug Coastal
Anchor handling winch forward: P = 20T at low speed (max cap)
Whilst every care has been taken in there preparation, the correctness of these particulars is not guaranteed.
The particulars are intended only as a guide and they do not constitute a term of any contract.
A perspective buyer is strongly advised to check the particulars and where appropriate to have the vessel fully surveyed and inspected, sea trialled and opened up
Note: Indicated location is approximate general area only.